24bay 3.5" DataON JBOD in 4U rackmountLogoDataOn


The DataON™ DNS-1600 6G SAS JBOD is a high-density, high-reliability and cost-effective 6G SAS to SAS/SATA disk direct attached primary or near-line storage solution. With DataON™ DNS-1600, you can customize the storage system for your needs. Configure it to meet the high reliability, high-performance with 6G SAS disk drive or low-cost high-capacity requirements with SATA disk drive or to create tiered storage solutions by mixing both 6G SAS and SATA disk drives in the same system. The DataON™ DNS-1600 6G SAS JBOD offers the high-performance and continuous availability demanded by today's business applications and provides customers with choices in performance, capacity and reliability. 

Density and Scalability
Each DNS-1600 6G SAS JBOD supports up to 24 disk drives in a 4U enclosure. It provides up to 72TB of SAS/SATA storage capacity for non-critical data or up to 14.4TB of high-performance 600GB 15K RPM 3.5" 6G SAS disk drive for primary mission-critical data storage. The DNS-1600 6G SAS JBOD can be scaled up to a total of 96 spindles (with four enclosures) for a total capacity of 288TB with 3.0TB SAS/SATA disk drive or 57.6TB with high-performance 6G SAS disk drive.

Redundancy & Reliability
Hot-Swappable disk drives and redundant, hot-swappable power and cooling modules that ensure the highest level of system availability and maximum possible uptime is achieved through dual active-active 6G Serial Attached SCSI I/O Module controllers that provide failover/failback operation.


  • 4U 24 x hot-swappable drive bays
  • Dual 6G SAS I/O Module option, supports multi-path redundancy
  • Three 6Gb/s SAS Ports on each I/O Module, two-in & one-out
  • 24 pre-installed AAMUX / Interposer board for SATA drive model
  • 760W (1+1) Redundant power w/cooling, hot-swappable
  • DataON JBOD Management Tool to monitor the system
  • >By daisy-chaining JBODs, supports up to 4 x DNS-1600 / 96SAS/SATA drives
  • Supports 3.0TB SAS/SATA  Hard Drive, total 72TB per DNS-1600



Storage Enclosure
Enclosure Form Factor 4U 60-bay Modular-SBB compliant
Drive Support 6Gb/s SAS Hard Drive
Drive Form Factor 3.5”, 2.5" Drive with DNS-2535 conversion kit (option)
I/O Controller Dual 6Gb/s SAS 2.0
Host Interface Two 6Gb/s SAS 4x wide ports via two SFF-8088
Expansion Interface Two 6Gb/s SAS 4x wide port via SFF-8088
Controller Support 6Gb/s Host-based RAID Controller cards and HBAs with external connectivity
Hot-Swappable & Redundancy
Disk Drives Hot-Swap ( 60-bay )
Cooling Fans Redundant -2 fans per power supply module
Power Supply Redundant ( 1+1 ) Dual output up to 1200W
Monitoring & Notification
LED Indicators *Identify Enclosure               *Power On      
*Activity / Fault for each Individual Drive Carrier
Rail Extension Kit *Regular: 25"    
*Extented: 33.5"
Daisy-Chain Up to Four JBOD Storage Enclosures / 240 Drives
Dimension & Weight
Dimensions 6.9” H x 16.56” W x 35.1” D
Weight Enclosure: 88lbs               Packaged: 137lbs (rail kit included)
Firmware SCSI Enclosure Services (SES) 3.0 based
Operational Environment
Operational Environment

Temperature:  5º to 35º C
Temperature gradient: 20º C per hour
Relative Humidity: 10% to 80% (non-condensing)
Humidity gradient: 10% per our
Altitude: -200 to 10,000 ft.
Shock: 5G at 11ms, ½ sine wave pulse
Vibration:  0.15G at 5Hz to 500Hz

Safety Standars IEC/EN/UL/CSA 60950-1, 2nd Edition


For more information contact Zstor's sales team via E-Mail:


Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok